Strikotherm 034 WDV Insulation Board Stump

Strikotherm 034 WDV Insulation Board Stump

Strikotherm 034 WDV Insulation Board Stump

  • Applicable in Strikotherm COMFORT
  • Insulation board with high insulation value
  • Has a lowered lambda-value
  • Rigid foam insulation based on polystyrene
  • Can be used on all solid, load-bearing surfaces provided these are free of movement
Strikotherm 034 WDV Insulation Board Stump

Available in:

  • Strikotherm NEO 034 WDV isolatieplaat 40 mm stomp 100x50 cm ( EAN: 8714738630041 )
  • Strikotherm NEO 034 WDV isolatieplaat 50 mm stomp 100x50 cm ( EAN: 8714738630058 )
  • Strikotherm NEO 034 WDV isolatieplaat 60 mm stomp 100x50 cm ( EAN: 8714738630065 )
  • Strikotherm NEO 034 WDV isolatieplaat 80 mm stomp 100x50 cm ( EAN: 8714738630089 )
  • Strikotherm NEO 034 WDV isolatieplaat 100 mm stomp 100x50 cm ( EAN: 8714738630102 )
  • Strikotherm NEO 034 WDV isolatieplaat 120 mm stomp 100x50 cm ( EAN: 8714738630126 )
  • Strikotherm NEO 034 WDV isolatieplaat 140 mm stomp 100x50 cm ( EAN: 8714738630140 )
  • Strikotherm NEO 034 WDV isolatieplaat 160 mm stomp 100x50 cm ( EAN: 8714738630164 )
  • Strikotherm NEO 034 WDV isolatieplaat 180 mm stomp 100x50 cm ( EAN: 8714738630188 )
  • Strikotherm NEO 034 WDV isolatieplaat 200 mm stomp 100x50 cm ( EAN: 8714738630201 )
  • Strikotherm NEO 034 WDV isolatieplaat 220 mm stomp 100x50 cm ( EAN: 8714738630225 )
  • Strikotherm NEO 034 WDV isolatieplaat 240 mm stomp 100x50 cm ( EAN: 8714738630249 )
  • Strikotherm NEO 034 WDV isolatieplaat 260 mm stomp 100x50 cm ( EAN: 8714738630263 )
  • Strikotherm NEO 034 WDV isolatieplaat 280 mm stomp 100x50 cm ( EAN: 8714738630287 )
  • Strikotherm NEO 034 WDV isolatieplaat 300 mm stomp 100x50 cm ( EAN: 8714738630300 )

Use

As rigid foam insulation in Strikotherm COMFORT exterior wall insulation systems. The insulation boards can be fixed to almost all solid, load-bearing surfaces that are free of movement. The insulation boards are seamlessly bonded with Strikotherm adhesive mortar to the underlying structure in such a way that the edges of the boards are completely glued and that an evenly distributed surface is created with at least 60% bonding. The insulation boards may, where indicated by the Strikotherm recommendations and B.R.L. 1328, and after drying (48 hours), be additionally fixed with Strikotherm Spreidpluggen expansion inserts.


Application

Downloads

NEED ADVICE?

Contact our customer service by phone:  +31 (0) 162 - 51 47 50 
or send an e-mail:
mail to infocenter@strikolith.com
Top