Strikocem MEP+-it lime-cement mortar

Strikocem MEP+-it lime-cement mortar

Strikocem MEP+-it lime-cement mortar

  • Fast-binding lime cement mortar
  • For indoor and outdoor use
  • For use on many mineral surfaces
  • Minimises surface tensions
  • For manual or mechanical processing
Strikocem MEP+-it lime-cement mortar

Available in:

  • Strikocem MEP+-it Kalk-cementpleister 25 kg ( EAN: 8714738502270 )

Use

MEP+-it is a universal lime-cement plaster which can be applied to many (insulating) mineral surfaces, both interior and exterior, as either a base coat or a finish coat. On highly insulating surfaces such as aerated concrete we recommend the use of Strikocem MKL (- it).
MEP+-it cannot be used on plaster meshes. It is an ideal base for Strikocem finish coats from the mortar groups CS-I (P-I) and CS-II (P-II), for Strikolith decorative plasters and for tiling (max. 15 kg/m2).
The minimum layer thickness for interior applications is 10 mm. The minimum layer thickness for exterior applications is 15 mm. Due to its excellent viscosity and controlled bonding technology the layer thickness per application run is 30 mm. The maximum system thickness is 50 mm (which is partly dependent on the loading capacity of the surface and the exterior wall(s)). For an optimum, long-lasting result we recommend that MEP+-it for exterior application is always finished using a Strikolith Pearlcoat paint system. Use Strikocem SLP- it or Strikocem MC at plinth level. For detailing at ground level please refer to our Publication 14.2
(http://www.strikolith.com/nl/files-website/4827/publicatie_142_start_strikocem.pdf )


Application

Strikocem MEP-Plus- it can be applied manually or using a machine. If using a machine, clean the machine and the hoses immediately after spraying has been completed. When applying using a machine do not interrupt spraying by more than 10 minutes. Mix Strikocem MEP-Plus- it using clean tap water (approximately 7L per 25 kg bag) to form a lump-free homogeneous paste. Mix a maximum of 3 x 25 kg bags each time. Never mix more than you can apply within 20 minutes. Do not re-mix, mix or apply material that has stiffened. To guarantee optimum curing no other materials should be added and the machines and hoses must be thoroughly cleaned. The maximum layer thickness per application run is 30 mm. Roughen the base layer horizontally when applying multiple layers. The maximum system thickness for Strikocem MEP+-it is 50 mm. In the event of applying multiple layers you must ensure that the next layer is not thicker than the previously applied base layer/covering layer and that the base layer has been allowed to dry 1 day per 2 mm of layer thickness. At high temperatures, combined with a very moisture-absorbent surface, apply two wet-on-wet layers. Due to the accelerated bonding time the roughcast layer can be processed (polished/sanded) after approximately 2 hours. For optimum sanding result the Strikocem MEP+-it can be over-plastered to gain thickness and sanded down (no later than) the next day. During application and drying protect the plaster against the effects of the weather. In dry weather and/or when there is a risk of fast drying moisten the plaster over several days using tap water. Strikocem MEP+-it is not to be applied when the air and/or surface temperatures are < +5º C / > +25º C, or when frost is expected. Before your first application using Strikocem it products contact the Strikolith Infocenter.

Downloads

THIS PRODUCT IS APPLIED IN THESE PROJECTS

ADVICE NEEDED?

Our customer service is ready for you.

Call 0800 – 787 45 65 Or send an email via:

mail to infocenter@strikolith.com
Top