As a lightweight bonding and foundation mortar for Strikotherm EWI systems
Mix into a homogenous mass with approx. 7.2 litres of water per 20kg bag, and apply manually or mechanically. Where the foundation is uneven, apply 3 to 4 cm-wide mortar paths right along the edge at the rear of the insulation plate, plus 2 paths to divide the surface into three. Where the foundation is flat, apply a coat of bonding mortar to the rear of the insulation plate with a combing-trowel (size 10 x 10mm), such that the trails of glue have a thickness of 10 mm. Always cover at least 60% of the upper surface with mortar. Applying basecoat: Apply the mortar evenly with an RVS trowel, then comb using a combtrowel (size 10 x 10mm). Next, embed the glass fabric mesh of the Strikolith fine type, with an overlap of at least 10cm in the mortar, and smooth down using an RVS trowel so that a coat thickness of approx. 4 mm (+/- 1mm) is obtained, such that the glass fabric will spread (pay attention to the upper corners of selvedges) and is embedded adequately. Do not mix with any other substances.
Onze klantenservice staat voor u klaar.
stuur een e-mailbericht via:mail naar email@example.com