Strikotherm Decorative plaster SILICON

Strikotherm Decorative plaster SILICON Strikotherm Decorative plaster SILICON

Strikotherm Decorative plaster SILICON

  • Topcoat for all Strikotherm exterior wall insulation systems
  • For use on mineral and gypsum substrates and GW-FLEX organic base coat mortar
  • Algae resistant
  • Exceptionally vapour permeable
  • Weatherproof and resistant to driving rain
Strikotherm Decorative plaster SILICON Strikotherm Decorative plaster SILICON

Available in:

  • Strikotherm Spachtelpleister SILICONEN 1,5 mm 22 kg ( EAN: 8714738201166 )
  • Strikotherm Spachtelpleister SILICONEN 2,0 mm 22 kg ( EAN: 8714738201173 )
  • Strikotherm Spachtelpleister SILICONEN 3,0 mm 22 kg ( EAN: 8714738201180 )

Use

Decorative plaster used as a finish for Strikotherm systems, on dry, clean and firm stone foundations.


Application

On Strikocem plaster system: after allowing the rough mortar to set thoroughly, treat with a single coat of Strikolith Diepgrond (Deep Primer), after which pre-treat with Strikotherm BGI Voorstrijk (BGI Primer) in the colour of the final coat.

On EWI: mortar fabric coat needs to dry out and set in the wind for at least 48 hours; pre-treat this foundation with Strikotherm BGI Voorstrijk in the colour of the final coat. Mix into a homogenous mass with a maximum of 2% clean tap-water per bucket. Apply evenly to the grainy thickness, either manually, using a stainless-steel trowel, or mechanically, moulding to suit. Do not mix with any other foreign substances. Clean tools with water directly after use.

Downloads

THIS PRODUCT IS APPLIED IN THESE PROJECTS

Advice needed?

Our customer service is ready for you.

Call +31 (0)162 – 51 47 50 or send an email via:

mail to infocenter@strikolith.com
Top