Strikotherm Lightweight plaster Orion O2 is applied outdoors as a high quality decorative plaster with an even grain structure.
Mix the Strikotherm Lightweight plaster Orion O2 well, adding up to 0.5% tap water (90 ml / ½ cup). Spread evenly with a stainless steel trowel until single-grain thickness is obtained. Then use a plastic texturing trowel to distribute the grains evenly and well, then immediately ‘tidy up’ the Orion O2 by lightly retracing/flattening.
It is important to texture O2 texturing plasters with a hard plastic texturing trowel (Alvernis: No. 101549 is recommended). By using a hard plastic texturing trowel, the grains stay in place better, which gives the best final result. It is more difficult to distribute the grains evenly if the plastic texturing trowel is soft.
Due to its unique properties and composition, Strikolith Lightweight plaster Orion O2 has a shorter drying time.
Clean tools with water immediately after use.
Onze klantenservice staat voor u klaar.
stuur een e-mailbericht via:mail naar firstname.lastname@example.org