As a lightweight bonding and foundation mortar for Strikotherm EWI systems
Mix into a homogenous mass with approx. 7.2 litres of water per 20kg bag, and apply manually or mechanically. Where the foundation is uneven, apply 3 to 4 cm-wide mortar paths right along the edge at the rear of the insulation plate, plus 2 paths to divide the surface into three. Where the foundation is flat, apply a coat of bonding mortar to the rear of the insulation plate with a combing-trowel (size 10 x 10mm), such that the trails of glue have a thickness of 10 mm. Always cover at least 60% of the upper surface with mortar. Applying basecoat: Apply the mortar evenly with an RVS trowel, then comb using a combtrowel (size 10 x 10mm). Next, embed the glass fabric mesh of the Strikolith fine type, with an overlap of at least 10cm in the mortar, and smooth down using an RVS trowel so that a coat thickness of approx. 4 mm (+/- 1mm) is obtained, such that the glass fabric will spread (pay attention to the upper corners of selvedges) and is embedded adequately. Do not mix with any other substances.
is succesvol verzonden
wij nemen zo spoedig contact met u op!