MEP-Plus is a universal lime-cement plaster which can be applied to many (insulating) mineral surfaces, both interior and exterior. On highly insulating surfaces such as aerated concrede we recommend the use of Strikocem MKL. It is an ideal base for Strikocem finish coats from the mortar groups CS-I (P-I) en CS-II (P-II), for Strikolith decorative plasters and for tilling (max. 15 kg/m2). The minimum layer thickness for interior applications is 10 mm. The minimum layer thickness for exterior applications is 15 mm. The layer thickness per application run is 20 mm. Use Strikocem SLP- it or Strikocem MC at plinth level. For detailing at ground level please refer to our Publication 14.2
Strikocem MEP-Plus can be applied manually or using a machine in the desire thickness (Inside minimum 10, outside minimum 15). With uneven absorbing substrates, apply Strikocem MEP-PLUS in 2 layers wet-in-wet. With a further finish, remove the sintersking using a shed. The MEP-Plus can also be delivered as a shed. If desired, for optimum sanding, the basecoat can be finished with a thin layer of MEP-Plus (approx. 3-4 mm) after a minimum of 2 and maximum 5 days of drying. The total layer thickness outside must be 15 mm.The maximum layer thickness per application run is 20 mm. Roughen the base layer horizontally when applying multiple layers. The In the event of applying multiple layers you must ensure that the next layer is not thicker than the previously applied base layer/covering layer and that the base layer has been allowed to dry 1 day per mm of layer thickness. In dry weather and/or when there is a risk of fast drying moisten the plaster over several days using tap water.
Onze klantenservice staat voor u klaar.
stuur een e-mailbericht via:mail naar firstname.lastname@example.org